METRIC
MIL-DTL-81248C
31 March 2006
SUPERSEDING
MIL-D-81248B
30 June 1980
DETAIL SPECIFICATION
DETECTOR PAD, FREE WATER
This specification is approved for use by all Departments and Agencies of the Department of
Defense.
1. SCOPE
1.1 Scope. This specification establishes the formulation and manufacturing requirements
for a free water detector pad. This uranine coated paper disc is used with the Model Number
MK II Free Water Detector, MIL-D-81227; the Type III, Detector, Contaminated Fuel,
MIL-D-22612; and the ASTM-D3240 Test Pad Rater.
1.2 Classification. The free water detector pads covered by this specification are of the
following sizes (see 6.2):
Size 1 - 37 mm
Size 2 - 47 mm
Size 3 - 25 mm
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this
specification. This section does not include documents cited in other sections of this
specification or recommended for additional information or as examples. While every effort has
been made to ensure the completeness of this list, document users are cautioned that they must
meet all specified requirements of documents cited in sections 3 and 4 of this specification,
whether or not they are listed.
Comments, suggestions, or questions on this document should be addressed to Naval Air
Systems Command AIR-4.4.5, Fuels and Lubricants Division, 22229 Elmer Road, Patuxent
River MD 20670-1534 or emailed to John.Krizovensky@navy.mil. Since contact information
can change, you may want to verify the currency of this address information using the
ASSIST Online database at https://assist.daps.dla.mil.
AMSC N/A
FSC 6640
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business