A-A-54346
Commercial tolerances shall apply to the dimensions for the outside diameters and wall thicknesses.
Shall be supplied with a ring strain in the glass tubing (if present) that shall not exceed 750 psi (5.2 MPa) in accordance with ASTM E-671 (Standard Specification for Maximum Permissible Thermal Residual Stress in Annealed Glass Laboratory Apparatus).
Workmanship. The glass tubing shall be free from defects which detract from its appearance or impair its serviceability.
Unit. Package (PG). One package containing the required quantity of glass tubing, as specified in the contract and/or order, constitutes one unit (see “Ordering data” paragraph).
Quality Assurance Provisions.
Responsibility for inspection. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contact or purchase order, the contractor may use his own or any facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements.
Records. Records of examinations and tests performed by or for the contractor shall be maintained by the contractor and made available to the Government upon the Government’s request, at any time, or from time to time, during the performance of the contract and for a period of three years after delivery of the supplies to which such records relate.
Inspection. Inspection, as used herein, is defined as both examination (such as visual or auditory investigation without the use of special laboratory appliances or procedures) and testing (determination by technical means of physical and chemical properties) of the item.
Inspections and tests. Inspections and tests shall be conducted on the glass tubing in accordance with commercial practice to determine compliance with specification requirements. Sampling for inspections and tests shall be conducted in accordance with commercial practice.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business