A-A-54335
Shall be constructed with a top mounted motor assembly and a bottom mounting terminating with a base that encloses impeller type blades. A vertical shaft shall connect the motor shaft to the impeller type blades, and shall be enclosed in a corrosion-resisting steel housing.
Shall include a corrosion-resistant metal top mounted housing for the motor assembly and controls, and a corrosion-resisting steel housing for the submersible parts. The top mounted housing shall include a non-detachable clamp for attaching subject circulating pump on the side of a water bath.
Shall at the option of the supplier be supplied with or without an integral electrical operated heater assembly.
Workmanship. The circulating pump shall be free from defects which detract from its appearance or impair its serviceability.
Unit. Each (EA). One pump, as specified, constitutes one unit.
Quality Assurance Provisions.
Responsibility for inspection. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contact or purchase order, the contractor may use his own or any facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements.
Records. Records of examinations and tests performed by or for the contractor shall be maintained by the contractor and made available to the Government upon the Government’s request, at any time, or from time to time, during the performance of the contract and for a period of three years after delivery of the supplies to which such records relate.
Inspection. Inspection, as used herein, is defined as both examination (such as visual or auditory investigation without the use of special laboratory appliances or procedures) and testing (determination by technical means of physical and chemical properties) of the item.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business