A-A-54228
An on-off electric switch that is secured in a suitable cut-out in the lamp base.
A magnifying mirror that is attached to the lamp base by a double universal ball joint. The mirror position shall be adjustable on the double universal ball joint and vary the magnification from 1-1/2X to 2X.
A minimum five (5) foot overall length line cord that terminates with a non-detachable three-blade male connector that is suitable for use in receptacles conforming to ANSI C73-11 or configuration No. () NEMA Standard WD 6-88. The other end of line cord shall be secured within the lamp base and shall be inserted into the lamp base through a suitable cutout that includes a grommet or bushing (for stain relief).
A lamp base that provides stability for the agglutination viewer when placed on a level is horizontal surface.
Shall have all exposed metal parts coated with () table protective finish.
Workmanship. The test agglutination shall be free from defects which detract from its appearance or impair its serviceability.
Quality Assurance Provisions.
Responsibility for inspection. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contact or purchase order, the contractor may use his own or any facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements.
Records. Records of examinations and tests performed by or for the contractor shall be maintained by the contractor and made available to the Government upon the Government’s request, at any time, or from time to time, during the performance of the contract and for a period of three years after delivery of the supplies to which such records relate.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business