A-A-51300A
At least 1 micron increments for a 1 to 10 micron sectioning thickness.
At least 3 micron increments for a 10 to 20 micron sectioning thickness.
At least 5 micron increments for a 20 to 50 micron sectioning thickness.
Shall provide a knife holder base that will accommodate either a knife holder or disposable blade holder. It shall allow for movement toward and away from the specimen, laterally as well as angle adjustments. The knife holder base shall bear an angle ’adjustment scale from 0 to 10 degrees in 5 degree minimum increments.
Shall allow specimen holders to be easily interchanged from a jaw clamp .to hold large paraffin blocks or embedding rings, to a universal quick release cassette clamp. The object clamps shall have the ability to easily undergo X/Y orientation to adjust the block cutting surface to the knife edge. The universal knife holder base shall easily accommodate either a knife holder or a disposable blade holder.
Shall be supplied with the following accessories:
Two each: 120 millimeter (mm) size microtome knives with a detachable handle (NOTE: One knife may be furnished without the handle).
Three object disks with necessary inserts or supports, one each with the following diameter: 7/8 inch or 25 millimeter, 1-1/8 inches, and 1-1/2 inches.
One disposable knife blade holder that is fabricated of corrosion-resisting steel, and is capable of securely locking an extra heavy or wafer thin disposable knife.
A minimum of thirty (30) microtome type extra heavy steel Single edge razor blades.
A protective cover.
Two (2) Allen wrenches (if required).
One screwdriver (if required).
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business