A-A-53065A
15 January 1988
Superseding
A-A-0053065 (DM)
19 July 1987
COMMERCIAL ITEM DESCRIPTION
TEST TUBE
The General Services Administration has authorized the use of this commercial item description.
This commercial item description covers the requirements for polypropylene test tubes suitable for use in laboratory procedures.
Salient Characteristics:
Shall be a rimless ungraduated translucent test tubes of polypropylene plastic. Shall have a round bottom and be capable of nesting within an 18 millimeter (mm) by 116 mm test tube. Shall have a capacity of 3.5 milliliters, a nominal length of 75 mm and a nominal diameter of 12 mm. shall be suitable for use as a replacement in Medical Equipment Set, Medical Laboratory, Combat, Individual.
Workmanship. The test tube shall be free from defects which detract from its appearance or impair its serviceability.
Unit. Package (PG). One package containing ten test tubes, as specified, constitutes one unit.
Quality Assurance Provisions.
Responsibility for inspection. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contact or purchase order, the contractor may use his own or any facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements.
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business