A-A-51799
21 January 1987
COMMERCIAL ITEM DESCRIPTION
BASKET, TEST TUBE
The General Services Administration has authorized the use of this commercial item description.
This commercial item description covers polypropylene autoclavable test tube baskets that are suitable for holding test tubes during incubation or sterilization procedures.
Salient characteristics:
Shall be test tube baskets suitable for holding test tubes during incubation or sterilization procedures.
Shall be of the following overall dimensional sizes:
Size 1: 6 X 6 X 6 inches
Size 2: 9 X 9 X 9 inches
Commercial tolerances on the dimensions shall be acceptable.
Shall be fabricated from polypropylene that is suitable to withstand an autoclaving temperature of 250 degrees Fahrenheit.
Shall be sides and bottom fabricated with mesh openings to facilitate drainage. The sides shall be tapered to permit nesting and compact storage of the same size baskets.
Workmanship. The baskets shall be free from defects which detract from their appearance or impair its serviceability.
Unit. Each (EA). One basket of the size specified constitutes one unit.
Quality Assurance Provisions.
Responsibility for inspection. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all inspection requirements as specified herein.
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business